Concrete Driveways
New concrete driveways, extensions and crossovers built to handle Caloundra's coastal weather. Plain, exposed, coloured or stamped finishes. Call Caloundra Concreters today!
Learn More →
Concrete paths, patios and outdoor entertaining areas that tie your yard together and stand up to sun, salt and summer storms. Call Caloundra Concreters today!
Request a Free Quote
We form and pour concrete paths and patios in Caloundra that drain properly, stay flat and are safe to walk on in the wet. That might be a side path that turns to mud every summer storm, a cracked patio pulling away from the house, or a new entertaining area off the back sliding doors. Every job starts with a compacted crushed rock base, timber or steel formwork set to the right falls, and steel reinforcing mesh held up on bar chairs so it sits inside the slab and not on the ground. We match the path widths, step-downs and edge details to how you actually move around your yard.
Caloundra's weather is hard on outdoor concrete. Heavy summer downpours find every low spot, so we set each path and patio to fall away from your house and toward a garden bed, grate or stormwater point. Sandy coastal soils near the beaches can wash out from under a slab edge, and some inland blocks have clay that moves as it wets and dries. We deal with both before we pour. High humidity also means shaded paths grow mould and algae quickly, so we use a broom or textured finish for grip and talk you through sealing options that help keep the surface clean.
Plain broom-finished concrete suits most paths and service areas, but a patio is often where people want something more. We can finish your patio in exposed aggregate for a natural stone look with good grip, or use coloured and stamped concrete to match your house or pool surrounds. If your yard already struggles with runoff, we can also combine a patio with permeable sections so less water pools against your walls.
From levels and base prep to finishing and saw cutting
We walk the area with you, check where water currently runs, and mark out the path or patio with string lines and pegs. We take levels off your house slab, doorways and existing paving so the new concrete sits at the right height and falls away from the building.
We dig out turf, roots and soft soil, then lay crushed rock and compact it in layers with a plate compactor. Formwork goes in to the set levels, and steel reinforcing mesh is placed on bar chairs. For patios against the house we add a plastic membrane under the slab where it suits the site.
Concrete is placed, screeded flat to the formwork and floated to bring up the cream. We then apply your chosen finish, edge the sides with an edging tool and tool or mark the control joints. On hot Caloundra days we start early and keep the surface from drying too fast while we work.
We cure the concrete so it gains strength evenly and cut control joints once the slab can take the saw. Formwork is stripped, edges are backfilled and the site is cleaned up. If you've chosen a sealer, we come back and apply it once the concrete is ready.
Better drainage, safer footing and outdoor space that stays flat
Paths and patios set to the correct falls carry storm water away from your walls, doors and footings. That means fewer puddles at the back door and less moisture sitting against brickwork after a summer downpour.
A broom or textured finish gives your shoes something to grip when the path is wet or starting to grow algae. It's a practical choice for side paths, pool surrounds and anywhere kids or older family members walk.
A patio poured on a well compacted base with proper reinforcement holds its shape under outdoor furniture, barbecues and pot plants. You get a flat, usable area that connects your house to the yard without trip edges or sunken corners.
We look at where water goes before we set a single peg. Falls, edges and outlets are planned so heavy summer rain moves off your paths and patio instead of pooling at the house.
Sandy coastal ground and reactive clay need different handling. We excavate soft material, compact crushed rock in layers and reinforce the slab so it doesn't wash out or crack from ground movement.
We recommend finishes based on where the concrete is, not just how it looks. A shaded side path, a pool surround and a covered alfresco area each need a different approach.
You deal with the concreters who set out, pour and finish your job. We explain the levels, joints and sealing options in plain terms so you know what you're getting before we start.
Common questions answered
It depends on the weather, the mix and the finish, and humid Caloundra conditions can change curing times. Light foot traffic comes first, with furniture and heavy items later. We'll tell you on the day when it's safe for each.
The main factors are the area and thickness, how much digging and base material the site needs, access for the concrete truck or barrow, and the finish you choose. Removing an old cracked path or working around pools, pipes and garden beds also adds time. We give you an itemised quote after seeing the site.
High humidity, shade and frequent rain let mould and algae grow on the surface, especially on south-facing side paths. A textured finish helps with grip, and a quality sealer makes the surface easier to clean. A periodic wash with a mild mould treatment keeps it under control.
Yes, but we set the height carefully so the patio sits below your door sill and falls away from the house. Pouring too high or too flat is a common cause of water coming inside during heavy rain. We check your house slab and termite protection details before setting levels.
Sealing is a good idea in coastal Caloundra because it helps with salt air, stains from barbecues and mould growth. How often you reseal depends on the sealer type, sun exposure and foot traffic. We'll explain the options and what upkeep each one needs.
We provide Paths & Patios throughout Caloundra, QLD and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All Areas